Benelli Choke Tube Chart - Crio, Crio Plus, Mobil

Related Products

Patternmaster Code Black Choke

Carlson's Cremator Choke

Carlson's Cremator Choke 2 Pack

The choke tube table above shows the diameters and constrictions you can expect for choke tubes and shotgun barrels for Benelli 12-gauge and 20-gauge shotguns featuring the Crio, Crio Plus, and Mobil choke systems. Knowing the diameter of a choke tube is important in order to identify choke tube constriction. The tighter the choke tube, the more constriction it has and the less constriction, the more open a choke will be.

Choke sizes are classified by both their measurement (to a thousandth of an inch) and by a special naming system. Choke measurements range from open chokes of around 0.735″ to 0.770″, to more restrictive chokes of around 0.600″ to 0.680″. Choke tubes are also classified by a naming structure that includes (from open to tight) cylinder, skeet, improved skeet, improved cylinder, light modified, modified, improved modified, light full, full, extra full, and turkey.

For choke sizes of other gauges and brands, see this chart.

Related – Looking for a NEW choke tube? See the TOP PICKS here!

Benelli Crio Plus Choke Size Chart

Choke Size	Diameter (in)
Cylinder	0.732
Skeet	0.727
Improved Skeet	0.722
Improved Cylinder	0.717
Light Modified	0.712
Modified	0.707
Improved Modified	0.702
Light Full	0.697
Full	0.692
Extra Full	0.687

Approximate choke sizes for Benelli Crio Plus in 12 gauge.

Benelli Mobil Choke Size Chart

Choke Size	Diameter (in)
Cylinder	0.726
Skeet	0.721
Improved Skeet	0.716
Improved Cylinder	0.711
Light Modified	0.706
Modified	0.701
Improved Modified	0.696
Light Full	0.691
Full	0.686
Extra Full	0.681

Approximate choke sizes for Benelli Mobil in 12 gauge.

Benelli Choke Tube Markings

Markings on Benelli choke tubes come in a wide range of variations, but their meaning across the spectrum is largely the same. Manufacturers can use notching/serration systems, color coding, alpha naming schemes, and color banding to indicate the diameter of the choke tube. This is done for quick verification without having to remove the choke from the gun in most cases.