Nothing is handier than a dependable choke tube wrench when you need to remove or replace a waterfowl choke. These lightweight devices can easily loosen stubborn or stuck choke tubes when nothing else seems to work.
Choke tube wrenches also allow you to quickly change between choke tube diameters (ex. Full to a modified) while in the field depending on how the birds are working. They come in a series of different designs, including friction choke wrenches, universal, and speed wrenches.
In this review we will discuss some of the best choke tubes wrenches for duck hunting that make interchanging choke systems a breeze.
Best Choke Wrench Comparison List
Best Choke Tube Wrenches
Below are the top 3 best choke wrenches that provide exceptional results for quickly changing choke tubes in the field or before the hunt.
1) Carlson’s Sporting Clays Speed Wrench
Carlson’s universal choke tube wrench works with most extended and flush choke tubes. It clamps the choke tube internally which then can be loosened. The speed wrench handle allows you to give it extra torque for stubborn chokes. This is the top pick.
- Allows you to Remove...
- Easy to operate...
- Works great in the...
- Has Lifetime...
2) Briley Speed Wrench
The Briley speed wrench works with most Briley choke tubes and all factory style 4 slot chokes. The wrench inside allows the teeth to bite so the choke can be removed. The speed wrench handle spins most chokes out in just a few seconds.
3) Real Avid Fini Universal Choke Wrench
The Avid Fini choke wrench is a key chain design which makes it easier to take just about any where. The flip out wrench has graduated choke size measurements that universally is adapted with most choke sizes. It fits inside the choke tube notches for easy removal. This is the budget option.
- MUST-HAVE SHOTGUN...
- CHANGE CHOKE TUBES:...
- HUNTING GEAR FOR ALL...
- ALL WEATHER SHOTGUN...
- FITS IN A POCKET OR...
What are the benefits of using a choke wrench?
Choke tube wrenches allow you to easily remove a choke tube from a shotgun without damaging the barrel, choke, or barrel threads. Standard choke tube wrenches are equipped with notches that fit into groves on the top of the choke tube which pressure can then be applied to twist the choke free. Friction wrenches expand inside the choke tube to create a tight grip on the inner walls of the tube which can then by turning, back out a choke.
Being able to easily remove choke tubes can be handy if you are hunting and need to switch choke tubes or if you are patterning shotgun loads and switching between choke tubes frequently. Additionally, if your choke tube is stuck, wrenches can provide the torque needed to break it free.
What should you look for when choosing a choke wrench for a shotgun?
Choke wrench selection is often guided by the brand of shotgun and the type of choke system installed on the gun itself. Remington, Benelli, and Browning all have different choke tube groove patterns and diameters that require specialized choke tube wrenches.
Universal and friction choke tubes look to solve the problem of various choke systems by offering a tool that can be used on a wide range of shotgun brands. If you have a large selection of shotguns that require choke removal, it often makes more sense to use a universal wrench instead of a brand specific wrench.
Can a Quarter Work as a Choke Tube Wrench?
Yes, a quarter fits perfectly for most Browning, Remington, and Winchester choke tube systems. If you are in a pinch, it is worth a try, but it is far from ideal. First, since a quarter is round, the edges do not fit squarely into the groves on a choke tube. This reduces the torque being applied to break the choke tube free. If you have a stuck choke tube, this method is not the best approach and you will likely just be damaging the quarter.
The quarter choke wrench works best when a choke tube is well oiled and a little tighter than hand tight. Even so, a choke wrench is almost always a better alternative.
Are universal choke tube wrenches the best?
Universal choke tube wrenches fit most choke tubes, but not all. Most shotguns come with a basic choke tube wrench when purchased which is designed for the choke system. If you have lost your factory choke wrench, a universal wrench is your best bet unless it is a specialty choke. For example, the Briley speed wrench will not work with Briley special thinwall choke tubes or the Titanium or Plasma Briley chokes.
What should you look for with Heavy Duty Choke Wrenches?
Heavy duty choke wrenches are those that grip good and extra torque can be applied. Friction choke wrenches don’t work the best for stuck choke tubes. A wrench that can bite into the notches on top of the choke will create more torque than wrenches that fit inside the tube and grab onto the side wall of the choke.
Are choke tube wrench sockets really needed?
Several choke tubes wrenches are offered from Midway and Brownells that attached to a socket. These are designed for choke tubes that are hopelessly stuck and not for every day use. They do provide an option for maximum torque to be applied.
DIY Choke Tube Wrenches are not really worth the effort
Choke tube wrenches are cheap and designed specifically to not cause damage to the choke tube. It’s not really worth the time and effort to make your own choke tube wrench unless you are in a pickle or bored.
Wondering what choke tube size you need?
Check out this table for most shotgun choke diameters
Last update on 2022-08-19 / Affiliate links / Images from Amazon Product Advertising API